Heat ventilation is a main requirement of shelter canopies. Diesel Generator coupled with alternator are the main source of heat in the chamber and it is very important to handle the thermal behavior inside the canopy utilizing free and forced cooling strategies with reduced energy utilization, lowest aerodynamic noise and noise escape from the chamber […]
Heat Ventilation Analysis for Diesel Generator (DG) Shelter Read More »
In 21st century, sustainable Industrial design is creating a huge demand for Architects and Engineers to implement new technologies and increase out of the box thinking. Implementing CFD allows every individual to confidently implement new technologies and ideas through the proof of virtual prototyping. This process enables Architects to mitigate risk of bad ventilation design
How CFD can helps to identify short-comings in Ventilation of Large Industrial Sheds? Read More »
Introduction: This Container is a carrier of complex electronic equipments used for Military purposes and also houses an integrated generator assembly for an autonomous power source. The base frame of the container is designed to withstand harsh environmental conditions, road vibrations, wind load, snow load and also has to have lifting and transportation capabilities. Following
Structural Analysis of RADAR Container/Enclosure as per US-MIL Standards Read More »
When it comes to sustainable building design, emphasis on environmental impact should be considered. The sustainable building design is about ensuring the core factors such as aesthetics, occupant comfort, indoor air quality and fire safety standards. Computer Aided Engineering (CAE) emphasis more on sustainability very early in the design process. CFD adds considerable value in
Why CFD simulation is so important in building ventilation design Read More »
Introduction: Wind Tunnel modelling in CFD is a very novel and effective approach to determine wind forces on Solar Trackers. Solar Trackers unlike fixed tilt MMS changes tilt angle based on the sun path for maximum solar incidence. Due to their tilt changing mechanism, Solar Trackers are very susceptible to wind forces. A heavy wind
Introduction: In recent years, stringent indoor air quality and thermal comfort is gaining importance in design of Industrial buildings. This study aims to find the optimal ventilation system and designed intently to improve energy efficiency and indoor air quality. CFD codes were used to simulate every category of the industrial complex in order to validate
Power of CFD simulation to predict ventilation behavior in Manufacturing units Read More »
Why FEA is required to validate the design: Top entry type, high pressure cryogenic ball valves are subjected to variety of safety standards to prevent the type of accidents that can be caused by earthquake, leakage, explosion or fire. Valve manufacturers need to validate the real scenario of such instances before installation of the equipment.
Finite Element (FEA) Thermal Shock analysis of a Cryogenic Ball valve. Read More »
What is Buckling? Buckling is an important concept in engineering, which is used to predict the behaviour of structures under a certain load. The buckling load refers to the amount of load required before a structural member or whole structure begins to buckle, meaning it will fail. When a structure is at its buckling point,
Non-Linear Buckling Analysis in FEA Read More »
Why CFD to simulate basement car parks Basement car parks are where natural ventilation is not possible, for the reason a mechanically extract system should be used. For mechanically ventilated car parks, it should be meet certain objectives. Firstly, when the car park is in general use, it is important that the exhaust air produced
SMOKE AND FIRE SIMULATION OF A BASEMENT CAR PARK Read More »
Structural base frames are welded ISMB and ISMC section for the application for mounting Super Diesel Generator. The frame is provided with lugs for lifting proposes and mountings to position the engine and alternator setup. US MIL standards are used to test the structure for various conditions of road and road induced shock, vibration analyses.
Structural FEA Analysis of Engine Skid as per US – MIL Read More »
We’re always looking for innovative companies to work with. If you have a project, let’s talk.
Mail us : info@graphlertech.com
